Skip to main content

©  Security Telecom Link. All rights reserved.

Intruder Alarm Systems

Intruder Alarm Systems are designed to detect attempts at intrusion or the appearance of an intruder in a facility under surveillance.

Intruder
Alarm

Designed to detect
attempts at intrusion
or the appearance of an intruder 

They can also be used to notify of other hazardous events such as fire, flooding or gas leaks. When a threat appears, it is possible not only to trigger an alarm signal, and notify the property owner and public services, such as a security agency, but also to cut off electricity, water or gas. The system can also perform additional functions such as access control or building automation control.

Call for a FREE survey

  • Alarm Control Panel
  • Control Devices
  • Detectors
  • Signaling Devices
  • Communication Modules
  • Power Supplies
  • Enclosures

Effective surveillance

A properly selected and configured system can effectively protect a facility regardless of its size and purpose: a house, flat, summer cottage, garage, as well as a workshop, warehouse, office or public building. No less importantly, the system can also protect the occupants of the area under surveillance.

Frequently Asked
Questions

What different types of intruder alarms do Security Telecom Link install?

Security Telecom Link install wireless and hardwired intruder alarm systems, recommended depending on the requirements of the premises. Once we have conducted a free site survey, identified strengths and weaknesses in the existing security setup (if any) and discussed your requirements, we can then choose the best systems for you, alongside you.

Generally, we install three different types of burglar alarm system.

1 – Monitored Alarm Systems – A monitored alarm system is connected to a dedicated alarm receiving centre (ARC) which monitors your property. If your alarm is activated, they will contact you and, where applicable, the police.

2 – Self-monitored Alarm Systems – As the name would suggest, these are self-monitored. The system will telephone you or the people you have previously specified when the alarm is triggered.

3 – Bell-Only Alarm Systems – These are simple to install and cheaper than monitored and self-monitored variants, though it should be mentioned that they will simply make a loud alarm, and will not notify the police, an ARC, or you that it has been triggered.

Our site surveys are intended as an examination of your property, and are intended to ascertain what system is sufficient for your property as well as your circumstances. They are entirely free of charge and completely obligation free- and are undertaken by qualified, experienced staff.

Do you install monitored alarm systems?

Absolutely. A monitored alarm system is, as the name would imply, an alarm which is linked to an Alarm Receiving Centre (ARC) by a telephone line (PSTN) mobile network (GSM or GPRS) broadband (IP) or a similar method.

It is important to remember that different types of monitored alarm systems transmit information throughout different ways, so regardless of where you live, the chances are you can get the benefit of a monitored alarm system.

Will the Police Come when the Alarm Goes Off?

If you have a monitored alarm system with the option of Police Response, then the ARC will contact the police if a ‘confirmed’ signal is transmitted from the alarm system.

it should be noted that the police will only visit a property when they have verification from the Alarm Receiving Centre (ARC) confirming that they believe the alarm has sounded in a genuine situation, and not a misfire. They will accept one of three options:

1 – Video Verification – Involves the ARC viewing alarmed areas remotely using CCTV cameras used by the system.

2-  Audio verification – For this method of verification, the police will request that the ARC listens to what is happening in the premises using microphones which are part of the system.

3- Sequential Verification – This involves two different detectors triggering in one instance of the alarm going off. At the first trigger, the ARC will listen in on the premises, and determine whether or not they can hear sounds which indicate a break-in.
At this stage, the police are not informed but the ARC will call the keyholders.

Most monitored intruder alarm systems use Sequential Verification.

What happens if too many false alarms go to the police?

The police treat intruder alarm calls under two categories of response. Level 1 signifies an immediate response, and level 3 denotes no response whatsoever. Most police forces will give “three lives” for intruder alarms, and two for panic alarms.

How long does installation take?

It varies on the size of the property and system specification required for the property in question, but typically, a three bedroom house will take one day for us. This is start-to-finish, including setup and testing.

Will the work create a big mess?

We try to minimise the disruption or inconvenience caused when we carry out an installation. While we are drilling, we’ll cover your floor with a sheet so your furnishings won't be made dirty. Once we have finished we sweep the area, or vaccum up any dirt should it be necessary.

Our fitters pride themselves on their neatness and tidiness, and you should not notice that we’ve even been there.

Can I set my home intruder alarm at night?

Yes, the alarm systems we provide allow you to fully-set or part-set the system depending on your situational needs. So at night you can leave the ground floor set and the first floor unset, so you can walk around without worry.

Is it possible to have alarms which are not monitored?

Yes, you can have an alarm system fitted which has no monitoring and you are solely in control of it, this is referred to as a ‘bell/audible only system’ – and it should be noted that with these, the police will not be notified should it be triggered. Furthermore, you are not notified should it be triggered.

Will my alarm work in a power cut?

In general, most alarms will work in the event of a power failure. All of our alarm control panels incorporate a standby battery which will power the system in the event of a mains electricity failure. The industry standard is for the battery to power the system for a min of 8 hours. If the system is armed and there is a power failure, the standby battery will hold the alarm in its current status until the power is restored or an activation is detected.

Didn’t find the answer to your question?
Contact us for more information.

24/7 Alarm Monitoring

Having your alarm monitored means, if activated, it will send a signal to our chosen Alarm Receiving Centre (ARC) via a phone line or mobile network.

Monitored alarms are designed to alert you to the first sign of intrusion. If your monitored alarm is triggered, the ARC will act immediately to initiate an appropriate response.

  Complete peace of mind for property owners

  Fast response, minimising chances of loss

  Helps to meet insurance requirements

Installation types

Depending on the type of connection between system devices, there are three types of alarm installations: wired, wireless and hybrid. Selection of the right type of installation and appropriate devices depends on many factors. We should take into account, for example, the possibility of routing the cables and the related costs, building architecture and construction technology (e.g. the thickness of the walls), the time of installation or the time available to complete the investment.

Wired

More traditional formats, whereby wires have to be laid to connect sensors to the control panel and bell box. The fact that they are wired and stop them from being interfered with or signals blocked.

Wireless

Wireless burglar alarms are easy to install and sometimes cheaper than a wired alarm system. Can be integrated into a smart home so when wireless alarm is triggered it can alert your phone or email

Hybrid

For the best of both worlds. If you have an existing system and want more detection but don’t like wires then this is the option for you. An ideal solution for larger houses and garages.

By selecting equipment that meets the stringent requirements of industry standards, we can be sure that the alarm system will provide protection at the expected level.

Areas of protection

The sooner an intrusion attempt is identified, the more effective property protection is. By dividing the protected space into areas and selecting appropriate devices, we ensure security from the very boundery of our property. Each additional area represents an additional line of protection designed to minimise the likelihood of an intruder entering the building and stealing.

External Perimeter

Along the property boundary

External Area

Around the building

Building Perimeter

Windows and doors

Interior

Rooms and traffic routes